What is active damping suspension?
The active suspension is a type of car suspension that controls the vertical movement of the wheels in relation to the chassis or body of the vehicle with a system on board, instead of passive suspension when the movement is determined entirely by the road surface.
What are balancing dampers?
Balance dampers are simply manual butterfly dampers integrated into a handle. Each branch has a balance damper installed. In this way, you can adjust the air flow by adjusting the position of the damper.
How does stabilizer increase voltage?
A voltage stabilizer increases the output voltage connected to the load when the normal voltage is supplied by the power company. It is made by a transformer within the stabilizer of a certain degree of volume amper.A voltage stabilizer increases the output voltage connected to the charge when the normal voltage is less powered by the power lat. This is achieved by a transformer inside the stabilizer of a specific volt ampoule.
What does a DRV valve do?
Usually, this valve is a standard Y ball valve available in this way to present the lowest pressure loss on the system when it is fully open. Adjusting this valve adds resistance to the system and therefore reduces the flow rate.Usually, this valve is a valve of the world of model Y arranged in this way to present the smallest loss of pressure on the system when it is fully opened. The adjustment of this valve will add resistance to the system and therefore reduce the flow rate.
What does a contactor do?
A contactor is an electrically controlled switch that is used to switch an electric power circuit. A contactor is normally controlled by a circuit that has a much lower power level than the switched circuit, such as a 24-volt coil electromagnet that controls a 230-volt engine switch.A contactor is an electrically controlled circuit breaker that is used to switch an electrical energy circuit. A contactor is generally controlled by a circuit that has a much lower energy level than the switched circuit, such as a 24 volt magnet that controls a 230 volt switch.